Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy
Primer Autor |
Tuninetti, V.
|
Co-autores |
Onate, A.
Valenzuela, M.
Sepulveda, H.
Pincheira, G.
Medina, C.
Garcia-Herrera, C.
Duchene, L.
Habraken, A. M.
|
Título |
Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy
|
Editorial |
ELSEVIER
|
Revista |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
|
Lenguaje |
en
|
Resumen |
The anisotropic plasticity constants of the CPB06 criterion for Ti64, previously identified with experiments performed in all three dimensions, are applied here to evaluate the effect of the direct and inverse calibration strategies of the tensile-compression asymmetry parameter k on the predictive behavior of large deformations of the hexagonal close-packed (hcp) alloy. The direct calibration strategy is based on model fitting with experimental strain hardening data up to the onset of plastic instability. The inverse calibration strategy reduces prediction errors of the load-displacement curves of both the cylindrical bar tensile and the elliptical cylinder compression tests. The results provide interesting insights into the identification of the laws modeling large deformations of hcp materials. (c) 2023 Published by Elsevier B.V.
|
Fecha Publicación |
2023
|
Tipo de Recurso |
artículo original
|
doi |
10.1016/j.jmrt.2023.08.255
|
Formato Recurso |
PDF
|
Palabras Claves |
Plastic instability
Identification strategy
Tension-compression asymmetry hcp
|
Ubicación del archivo | |
Categoría OCDE |
Ciencia de Materiales
Metalurgia e Ingeniería Metalúrgica
|
Materias |
Inestabilidad plástica
Estrategia de identificación
Asimetría tensión-compresión hcp
|
Página de inicio (Recomendado-único) |
5028.0
|
Página final (Recomendado-único) |
5036
|
Identificador del recurso (Mandatado-único) |
artículo original
|
Versión del recurso (Recomendado-único) |
versión publicada
|
License |
CC BY-NC-ND 4.0
|
Condición de la licencia (Recomendado-repetible) |
CC BY-NC-ND 4.0
|
Derechos de acceso |
acceso abierto
|
Access Rights |
acceso abierto
|
Id de Web of Science |
WOS:001074003700001
|
ISSN |
2238-7854
|
Tipo de ruta |
Verde# dorado
|
Categoría WOS |
Ciencia de Materiales
Metalurgia e Ingeniería Metalúrgica
|