Repositorio UFRO · Omeka S

Microstructure and mechanical properties of ternary mortars with brick powder, glass powder, slag, fly ash, and limestone

Primer Autor	Marcos Ortega, Jose
Co-autores	Maria Tremino, Rosa Real-Herraiz, Teresa Letelier, Viviana
Título	Microstructure and mechanical properties of ternary mortars with brick powder, glass powder, slag, fly ash, and limestone
Editorial	WILEY
Revista	INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
Lenguaje	en
Resumen	The objective of this research is to study the effects produced by ternary binders which combine the addition of waste brick powder with fly ash, limestone, ground granulated blast furnace slag or waste glass powder in the microstructure and mechanical properties of mortars. In these ternary binders, the ordinary Portland cement was partially replaced by 10% of waste brick powder and 10% of another of the abovementioned additions. Mortars prepared with ordinary Portland cement without additions were also prepared. The microstructure was characterized with mercury intrusion porosimetry, electrical resistivity, and thermogravimetric analyses. Ultrasonic pulse velocity, compressive and flexural strengths were also determined. Mortars made using ternary binders with two active additions showed higher pore refinement and higher electrical resistivity at 250 days. Furthermore, their compressive strength and ultrasonic pulse velocity were relatively similar or even higher than that noted for reference specimens.
Tipo de Recurso	artículo original
Description	Conselleria de Educacion, Investigacion, Cultura y Deporte (presently renamed as Conselleria de Innovacion, Universidades, Ciencia y SociedadDigital) de la Generalitat Valenciana, Spain, Grant/Award Number: GV/2019/070, Agencia Nacional de Investigacion y Desarrollo de Chile (ANID), Grant/Award Number: FONDECYT REGULAR 1211135 Conselleria de Educacion, Investigacion, Cultura y Deporte (presently renamed as Conselleria de Innovacion, Universidades, Ciencia y SociedadDigital) de la Generalitat Valenciana, Spain, Grant/Award Number: GV/2019/070; Agencia Nacional de Investigacion y Desarrollo de Chile (ANID), Grant/Award Number: FONDECYT REGULAR 1211135
doi	10.1111/ijac.14012
Formato Recurso	PDF
Palabras Claves	binders binding glass mechanical properties microstructure waste brick powder MAIN CLINKER PHASES BLAST-FURNACE SLAG PORTLAND-CEMENT DURABILITY PROPERTIES COMPRESSIVE STRENGTH POTENTIAL USE CLAY BRICK PART I CONCRETE WASTE
Ubicación del archivo	http://dx.doi.org/10.1111/ijac.14012
Categoría OCDE	Ciencia de Materiales Cerámica
Materias	aglutinantes conglomerante vidrio propiedades mecánicas microestructura residuos de polvo de ladrillo FASES PRINCIPALES DEL CLINKER ESCORIA DE ALTO HORNO CEMENTO PORTLAND PROPIEDADES DE DURABILIDAD RESISTENCIA A LA COMPRESIÓN USO POTENCIAL LADRILLO DE ARCILLA PARTE I HORMIGÓN RESIDUOS
Disciplinas de la OCDE	Ingeniería de los Materiales Ingeniería Civil Cerámicos
Título de la cita (Recomendado-único)	Microstructure and mechanical properties of ternary mortars with brick powder, glass powder, slag, fly ash, and limestone
Página de inicio (Recomendado-único)	2135
Página final (Recomendado-único)	2147
Identificador del recurso (Mandatado-único)	artículo original
Versión del recurso (Recomendado-único)	version publicada
License	CC BY 4.0
Condición de la licencia (Recomendado-repetible)	CC BY 4.0
Derechos de acceso	acceso abierto
Access Rights	acceso abierto
Referencia del Financiador (Mandatado si es aplicable-repetible)	ANID-FONDECYT 1211135 CIUCSD GV/2019/070 ANID FONDECYT 1211135
Id de Web of Science	WOS:000754300600001