A New Current Transducer for On-Line Monitoring of Leakage Current on HV Insulator Strings
| Primer Autor |
Villalobos, Rodrigo J.,
|
| Co-autores |
Moran, Luis A.
Huenupan, Fernando
Vallejos, Francisco
Moncada, Roberto
Pesce, Cristian G.
|
| Título |
A New Current Transducer for On-Line Monitoring of Leakage Current on HV Insulator Strings
|
| Editorial |
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
|
| Revista |
IEEE ACCESS
|
| Lenguaje |
en
|
| Resumen |
Leakage current measurement and its harmonics have been widely used for the pollution level estimation of HV insulator strings. However, the solutions available to applications into transmission lines and substations are few and it reduces the creepage distance (mm/kV), must be installed by de-energizing the electrical power system or do not allow the characteristic harmonics of the leakage current to be obtained. This paper presents the design, implementation, testing, and experimental validation of a transducer for measuring and online monitoring of leakage currents on high-voltage insulator strings. The transducer is composed of a clamp-type current transformer with a supermalloy material core. The leakage current is reconstructed from the transducer output voltage by applying the Fast Fourier Transform (FFT) and its own inverse transfer function, which allows it to obtain the leakage current with its characteristic harmonics and reduces the electromagnetic noise present in power systems. The output voltage of the transducer was acquired, processed, and transmitted using a dedicated device installed in the HV tower. The proposed transducer was first tested on an insulator inside an artificial fog chamber according to the IEC 60507 standard. The transducer was experimentally validated on an insulator string in a 220 kV substation. The results showed that the designed transducer measured the leakage current and its harmonics with an average error less than 1.76%. With these results the transducer can be used for the on-line monitoring of pollution levels of insulator strings without reduces the creepage distance.
|
| Tipo de Recurso |
artículo original
|
| Description |
This work was supported in part by the Conicyt Fondef/Cuarto Concurso IDeA en Dos Etapas del Fondo de Fomento al Desarrollo Cientifico y Tecnologico, Fondef/Conicyt 2017, under Grant ID17I20421, and in part by the Direccion de Investigacion, Universidad de La Frontera.
|
| doi |
10.1109/ACCESS.2022.3191349
|
| Formato Recurso |
PDF
|
| Palabras Claves |
Insulators
Transducers
Leakage currents
Current measurement
Pollution measurement
Transmission line measurements
Pollution
Current transducer
HV insulator strings
leakage current
on-line monitoring
pollution level estimation
CONTAMINATION LEVEL
FLASHOVER PROCESS
CURRENT INDEX
VOLTAGE
POLLUTION
PORCELAIN
|
| Ubicación del archivo | |
| Categoría OCDE |
Ciencias de la Computación
Sistemas de Información
Ingeniería Eléctrica y Electrónica
Telecomunicaciones
|
| Materias |
Aisladores
Transductores
Corrientes de fuga
Medición de corriente
Medición de contaminación
Medidas de líneas de transmisión
Contaminación
Transductor de corriente
Cadenas de aisladores de alta tensión
corriente de fuga
monitoreo en línea
estimación del nivel de contaminación
NIVEL DE CONTAMINACIÓN
PROCESO DE FLASHOVER
ÍNDICE DE CORRIENTE
TENSIÓN
CONTAMINACIÓN
PORCELANA
|
| Título de la cita (Recomendado-único) |
A New Current Transducer for On-Line Monitoring of Leakage Current on HV Insulator Strings
|
| Página de inicio (Recomendado-único) |
78818
|
| Página final (Recomendado-único) |
78826
|
| Identificador del recurso (Mandatado-único) |
artículo original
|
| Versión del recurso (Recomendado-único) |
version publicada
|
| License |
CC BY-NC-ND 4.0
|
| Condición de la licencia (Recomendado-repetible) |
CC BY-NC-ND 4.0
|
| Derechos de acceso |
acceso abierto
|
| Access Rights |
acceso abierto
|
| Referencia del Financiador (Mandatado si es aplicable-repetible) |
ANID-FONDEF ID17I20421
ANID FONDEF ID17I20421
|
| Id de Web of Science |
WOS:000836204600001
|