Accuracy of a new online method for measuring machining parameters in milling
| Primer Autor |
Diez, E.
|
| Co-autores |
Leal-Munoz, E.#Perez, H.#Vizan, A.
|
| Título |
Accuracy of a new online method for measuring machining parameters in milling
|
| Editorial |
ELSEVIER SCI LTD
|
| Revista |
MEASUREMENT
|
| Lenguaje |
en
|
| Resumen |
The development of new methodologies to monitor, control and optimize manufacturing systems is on the increase. In this sense, the aim of this paper is to analyze the accuracy of an online method for measuring machining parameters from cutting force signals in milling processes. The method is based on time measurement which, in principle, provides sufficient precision to detect minor variations in cutting parameters. In order to assess the accuracy of the method, the sensitivity and uncertainty of the variables involved have been determined, classifying them according to their influence on the results. The dynamic response of the tool may affect the accuracy of the measurement. For this reason, a function that relates the response time to the input variables in the process is determined. The force signal is obtained with a dynamometric platform using piezoelectric sensors, which provides robustness to the proposed measurement method. The results of the measurement of depths of cut show a high degree of precision with uncertainties below 4%.
|
| Tipo de Recurso |
Artículo original
|
| Description |
This work has been funded by CONICYT FONDECYT - Chile 11130721 and DPI - Spain 2016-79960-C3-1-P from the Spanish Ministry of Economy, Industry and Competitiveness. Mr. Leal-Munoz thanks to CONICYT Becas Chile 72170282. The authors would also like to express their thanks to Mr. Ramon San Miguel and Mr. Javier Tena for their technical assistance in running the cutting experiments.
|
| doi |
10.1016/j.measurement.2018.06.018
|
| Formato Recurso |
pdf
|
| Palabras Claves |
End milling# Cutting parameters# Uncertainty analysis# Milling dynamics
End milling# Cutting parameters# Uncertainty analysis# Milling dynamics
|
| Ubicación del archivo |
http://dx.doi.org/10.1016/j.measurement.2018.06.018
|
| Categoría OCDE |
Engineering, Multidisciplinary# Instruments & Instrumentation
|
| Materias |
Fresado final# Parámetros de corte# Análisis de incertidumbre# Dinámica de fresado
Fresado final# Parámetros de corte# Análisis de incertidumbre# Dinámica de fresado
|
| Id de Web of Science |
WOS:000440449800017
|
| Título de la cita (Recomendado-único) |
Accuracy of a new online method for measuring machining parameters in milling
|
| Identificador del recurso (Mandatado-único) |
Artículo original
|
| Versión del recurso (Recomendado-único) |
version publicada
|
| Editorial |
ELSEVIER SCI LTD
|
| Revista/Libro |
MEASUREMENT
|
| Categoría WOS |
Ingeniería Multidisciplinaria# Instrumentos e instrumentación
|
| ISSN |
0263-2241
|
| Idioma |
en
|
| Referencia del Financiador (Mandatado si es aplicable-repetible) |
ANID CONICYT FONDECYT 11130721#MINECO DPI - Spain 2016-79960-C3-1-P#ANID CONICYT Becas Chile 72170282
|
| Descripción |
This work has been funded by CONICYT FONDECYT - Chile 11130721 and DPI - Spain 2016-79960-C3-1-P from the Spanish Ministry of Economy, Industry and Competitiveness. Mr. Leal-Munoz thanks to CONICYT Becas Chile 72170282. The authors would also like to express their thanks to Mr. Ramon San Miguel and Mr. Javier Tena for their technical assistance in running the cutting experiments.
|
| Formato |
pdf
|
| Tipo de ruta |
hibrida#verde
|
| Access Rights |
metadata
|
| Derechos de acceso |
metadata
|
| Página de inicio (Recomendado-único) |
199
|
| Página final (Recomendado-único) |
208
|
- Colecciones
- Colección Publicaciones Científicas
cienciaabierta.ufro.cl
ciencia.abierta@ufrontera.cl