Colección

Ingeniería de los Materiales

Búsqueda avanzada
artículo original abierto
Evolution of Face-Centered Cubic Ti Alloys Transformation by X-ray Diffraction Profile Analysis in Mechanical Alloying
artículo original restringido
Experimental characterization of the compressive mechanical behaviour of Ti6Al4V alloy at constant strain rates over the full elastoplastic range
artículo original abierto
Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales
artículo original otro
Formulation of a multifunctional coating based on polyphenols extracted from the Pine radiata bark and functionalized zinc oxide nanoparticles: Evaluation of hydrophobic and anticorrosive properties
patente
Granulated Additive Based On Textile Fibres From End-Of-Life Tyres (Elt), Tyre Powder And Asphalt Binder And Method For Obtaining The Product And Use
abierto
Green Composites from Residual Microalgae Biomass and Poly(butylene adipate-co-terephthalate): Processing and Plasticization
artículo original metadatos
Hematene: a 2D magnetic material in van der Waals or non-van der Waals heterostructures
artículo original metadatos
High performance of V2O5 thin film electrodes for lithium-ion intercalation
artículo de revisión abierto
High-entropy alloys: A review of their performance as promising materials for hydrogen and molten salt storage
artículo original abierto
High-Performance Concrete from Rubber and Shell Waste Materials: Experimental and Computational Analysis
artículo original metadatos
Highway trial sections: Performance evaluation of warm mix asphalt and recycled warm mix asphalt
artículo original abierto
Histomorphometric Analysis of Osseointegrated Grade V Titanium Mini Transitional Implants in Edentulous Mandible by Backscattered Scanning Electron Microscopy (BS-SEM)
artículo original abierto
Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices
artículo original metadatos
Identification and validation of an extended Stewart-Cazacu micromechanics damage model applied to Ti-6Al-4V specimens exhibiting positive stress triaxialities
artículo original metadatos
Impact of cooling rate and shear flow on crystallization and mechanical properties of wax-crystal networks
artículo original restringido
Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6Al4V alloy
artículo original metadatos
Improvement of thermomechanical properties of composite based on hydroxyapatite functionalized with alkylsilanes in epoxy matrix
artículo original otro
Influence of martensite and grain size on the mechanical behavior of austenitic Fe-C-Mn-Ni-Al medium Mn steels with TWIP mechanism under uniaxial tension/compression and micromechanical creep
artículo original abierto
Influence of Murta (Ugni molinae Turcz) Powder on the Frankfurters Quality
Artículo original metadatos
Inscription and stabilization of ferromagnetic patterns on arrays of magnetic nanocylinders
artículo original metadatos
Magnon polarons induced by a magnetic field gradient
artículo original metadatos
Magnon valley Hall effect in CrI 3 -based van der Waals heterostructures
artículo original abierto
Maximizing the use of recycled aggregates from combined thermal/ mechanical and accelerated carbonation treatment
metadatos
Mechanical behavior of asphalt mixtures with different aggregate type
patente
Método De Ensayo Para Determinar La Resistencia A Fatiga De Mezclas Asfálticas Por Barrido De Tensiones, Y Procedimiento De Obtención De Probetas.
artículo original abierto
Microstructure and Durability Performance of Mortars with Volcanic Powder from Calbuco Volcano (Chile) after 4 Hardening Years
artículo original abierto
Microstructure and mechanical properties of ternary mortars with brick powder, glass powder, slag, fly ash, and limestone
artículo original otro
Microstructure evolution of Incoloy 800H in industrial environment and correlation with creep mechanisms from literature
artículo original abierto
Miniaturized Shear Testing: In-Plane and Through-Thickness Characterization of Plywood
artículo original metadatos
Monolayer 2D ZrTe 2 transition metal dichalcogenide as nanoscatter for random laser action
artículo de revisión otro
Multicomponent alloys design and mechanical response: From high entropy alloys to complex concentrated alloys
artículo original metadatos
Nanomechanical Characterization of the Deformation Response of Orthotropic Ti-6Al-4V
Artículo de revisión restringido
Natural Additives in Bioactive Edible Films and Coatings: Functionality and Applications in Foods
artículo original abierto
New Sustainable Intumescent Coating Based on Polyphenols Obtained from Wood Industry Waste
artículo original metadatos
Novel Rechargeable Lithium-Ion Battery Based on a Cathode of Potassium-Cobalt(II) Octacyanomolybdate
artículo original restringido
One-step electrospun scaffold of dual-sized gelatin/poly-3-hydroxybutyrate nano/microfibers for skin regeneration in diabetic wound
artículo original abierto
Optimal triplicator design applied to a geometric phase vortex grating
artículo original abierto
Optimised biopolymer-based capsules for enhancing the mechanical and self-healing properties of asphalt mixtures
Artículo original abierto
OPTIMIZATION OF A QUALITY MODEL FOR CCA INDUSTRIAL IMPREGNATION OF PINUS RADIATA D. DON AGRICULTURAL FENCING
artículo original metadatos
Physical, Chemical and Mechanical Characterization of a Prototype Insulating Material Based on Eucalyptus Bark Fiber
artículo original metadatos
Plasmonically enhanced hybrid metalorganic random laser in eggshell biomembrane
artículo original otro
Plastic deformation behavior and energy absorption performance of a metamaterial based on auxetic lattices
artículo de revisión metadatos
Polyhydroxyalkanoates as biomaterial for electrospun scaffolds
artículo original restringido
Polypropylene with clay-filled for fused filament fabrication: comparative study of the mechanical performance of injected and 3d printed composite
artículo original otro
Production of Nb-doped super duplex stainless steel based on recycled material: A study of the microstructural characterization, corrosion, and mechanical behavior
artículo original abierto
Real-time Particle Size Analysis Using the Focused Beam Reflectance Measurement Probe for In Situ Fabrication of Polyacrylamide-Filler Composite Materials
artículo original metadatos
Rechargeable Lithium-Ion Battery Based on a Cathode of Copper Hexacyanoferrate
artículo original abierto
Review on Sol-Gel Synthesis of Perovskite and Oxide Nanomaterials
artículo original restringido
Root cause and vibration analysis to increase veneer manufacturing process efficiency: a case study on an industrial peeling lathe
artículo original abierto
Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition
Evolution of Face-Centered Cubic Ti Alloys Transformation by X-ray Diffraction Profile Analysis in Mechanical Alloying
Autores: Pio, Edgar
artículo original abierto
Experimental characterization of the compressive mechanical behaviour of Ti6Al4V alloy at constant strain rates over the full elastoplastic range
Autores: Tuninetti, Victor
artículo original restringido
Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales
Autores: Tuninetti, Victor
artículo original abierto
Formulation of a multifunctional coating based on polyphenols extracted from the Pine radiata bark and functionalized zinc oxide nanoparticles: Evaluation of hydrophobic and anticorrosive properties
Autores: Melendrez, M. F.
artículo original otro
Granulated Additive Based On Textile Fibres From End-Of-Life Tyres (Elt), Tyre Powder And Asphalt Binder And Method For Obtaining The Product And Use
Autores: Valdés Vidal, Gonzalo Alfonso
patente
Green Composites from Residual Microalgae Biomass and Poly(butylene adipate-co-terephthalate): Processing and Plasticization
Autores: Torres, Simonet
abierto
Hematene: a 2D magnetic material in van der Waals or non-van der Waals heterostructures
Autores: Munoz, F.
artículo original metadatos
High performance of V2O5 thin film electrodes for lithium-ion intercalation
Autores: Hevia, Samuel A.
artículo original metadatos
High-entropy alloys: A review of their performance as promising materials for hydrogen and molten salt storage
Autores: Pineda, Fabiola
artículo de revisión abierto
High-Performance Concrete from Rubber and Shell Waste Materials: Experimental and Computational Analysis
Autores: Tuninetti, Victor
artículo original abierto
Highway trial sections: Performance evaluation of warm mix asphalt and recycled warm mix asphalt
Autores: Valdes-Vidal, G.
artículo original metadatos
Histomorphometric Analysis of Osseointegrated Grade V Titanium Mini Transitional Implants in Edentulous Mandible by Backscattered Scanning Electron Microscopy (BS-SEM)
Autores: Valdivia-Gandur, Ivan
artículo original abierto
Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices
Autores: Melendrez, Manuel
artículo original abierto
Identification and validation of an extended Stewart-Cazacu micromechanics damage model applied to Ti-6Al-4V specimens exhibiting positive stress triaxialities
Autores: Tuninetti, Victor
artículo original metadatos
Impact of cooling rate and shear flow on crystallization and mechanical properties of wax-crystal networks
Autores: Marangoni, Alejandro G.
artículo original metadatos
Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6Al4V alloy
Autores: Tuninetti, Victor
artículo original restringido
Improvement of thermomechanical properties of composite based on hydroxyapatite functionalized with alkylsilanes in epoxy matrix
Autores: Medina, C.
artículo original metadatos
Influence of martensite and grain size on the mechanical behavior of austenitic Fe-C-Mn-Ni-Al medium Mn steels with TWIP mechanism under uniaxial tension/compression and micromechanical creep
Autores: Onate, Angelo
artículo original otro
Influence of Murta (Ugni molinae Turcz) Powder on the Frankfurters Quality
Autores: Inostroza, Karla
artículo original abierto
Inscription and stabilization of ferromagnetic patterns on arrays of magnetic nanocylinders
Autores: Cisternas, E.
Artículo original metadatos
Magnon polarons induced by a magnetic field gradient
Autores: Vidal-Silva, N.
artículo original metadatos
Magnon valley Hall effect in CrI 3 -based van der Waals heterostructures
Autores: Munoz, F.
artículo original metadatos
Maximizing the use of recycled aggregates from combined thermal/ mechanical and accelerated carbonation treatment
Autores: Letelier, Viviana
artículo original abierto
Mechanical behavior of asphalt mixtures with different aggregate type
Autores: Norambuena-Contreras, J.
metadatos
Método De Ensayo Para Determinar La Resistencia A Fatiga De Mezclas Asfálticas Por Barrido De Tensiones, Y Procedimiento De Obtención De Probetas.
Autores: Calabi Floody, Alejandra Tatiana
patente
Microstructure and Durability Performance of Mortars with Volcanic Powder from Calbuco Volcano (Chile) after 4 Hardening Years
Autores: Ortega, Jose Marcos
artículo original abierto
Microstructure and mechanical properties of ternary mortars with brick powder, glass powder, slag, fly ash, and limestone
Autores: Marcos Ortega, Jose
artículo original abierto
Microstructure evolution of Incoloy 800H in industrial environment and correlation with creep mechanisms from literature
Autores: Rojas-Ulloa, Carlos
artículo original otro
Miniaturized Shear Testing: In-Plane and Through-Thickness Characterization of Plywood
Autores: Tuninetti, Victor
artículo original abierto
Monolayer 2D ZrTe 2 transition metal dichalcogenide as nanoscatter for random laser action
Autores: Pincheira, Pablo I. R.
artículo original metadatos
Multicomponent alloys design and mechanical response: From high entropy alloys to complex concentrated alloys
Autores: Onate, Angelo
artículo de revisión otro
Nanomechanical Characterization of the Deformation Response of Orthotropic Ti-6Al-4V
Autores: Tuninetti, Victor
artículo original metadatos
Natural Additives in Bioactive Edible Films and Coatings: Functionality and Applications in Foods
Autores: Silva-Weiss, A.
Artículo de revisión restringido
New Sustainable Intumescent Coating Based on Polyphenols Obtained from Wood Industry Waste
Autores: Melendrez, Manuel F.
artículo original abierto
Novel Rechargeable Lithium-Ion Battery Based on a Cathode of Potassium-Cobalt(II) Octacyanomolybdate
Autores: Muñoz, Eduardo
artículo original metadatos
One-step electrospun scaffold of dual-sized gelatin/poly-3-hydroxybutyrate nano/microfibers for skin regeneration in diabetic wound
Autores: Acevedo, Francisca
artículo original restringido
Optimal triplicator design applied to a geometric phase vortex grating
Autores: Moreno, Ignacio
artículo original abierto
Optimised biopolymer-based capsules for enhancing the mechanical and self-healing properties of asphalt mixtures
Autores: Norambuena-Contreras, Jose
artículo original abierto
OPTIMIZATION OF A QUALITY MODEL FOR CCA INDUSTRIAL IMPREGNATION OF PINUS RADIATA D. DON AGRICULTURAL FENCING
Autores: Vergara Vera, Pedro
Artículo original abierto
Physical, Chemical and Mechanical Characterization of a Prototype Insulating Material Based on Eucalyptus Bark Fiber
Autores: Rojas, C.
artículo original metadatos
Plasmonically enhanced hybrid metalorganic random laser in eggshell biomembrane
Autores: de Oliveira, Helinando Pequeno
artículo original metadatos
Plastic deformation behavior and energy absorption performance of a metamaterial based on auxetic lattices
Autores: Pincheira, Gonzalo
artículo original otro
Polyhydroxyalkanoates as biomaterial for electrospun scaffolds
Autores: Acevedo, Francisca
artículo de revisión metadatos
Polypropylene with clay-filled for fused filament fabrication: comparative study of the mechanical performance of injected and 3d printed composite
Autores: Melendrez, Manuel F.
artículo original restringido
Production of Nb-doped super duplex stainless steel based on recycled material: A study of the microstructural characterization, corrosion, and mechanical behavior
Autores: Rojas, D.
artículo original otro
Real-time Particle Size Analysis Using the Focused Beam Reflectance Measurement Probe for In Situ Fabrication of Polyacrylamide-Filler Composite Materials
Autores: Sankaranarayanan, Sivashunmugam
artículo original abierto
Rechargeable Lithium-Ion Battery Based on a Cathode of Copper Hexacyanoferrate
Autores: Muñoz, Eduardo
artículo original metadatos
Review on Sol-Gel Synthesis of Perovskite and Oxide Nanomaterials
Autores: Fuentes, Sandra
artículo original abierto
Root cause and vibration analysis to increase veneer manufacturing process efficiency: a case study on an industrial peeling lathe
Autores: Tuninetti, Victor
artículo original restringido
Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition
Autores: Habraken, Anne Marie
artículo original abierto